Temperature: | Ordinary Temperature |
---|---|
Certification: | RoHS, CE, ISO9001 |
Media: | Gas, Oil |
Standard: | Standard |
Connection Mode: | Flange |
Power: | Electric |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
GDF-5 pipeline gas ball valve is a valve used on gas pipelines to control the on-off of transmission medium. It can be installed on the gas pipeline as an independent component, and can automatically control the on-off of gas reliably; it can also be used together with the flow meter to realize the functional integration of pipeline gas measurement and on-off control.
Items | Data |
Media: | Natural gas,Coal gas |
Storage temperature: | -30ºC~70ºC |
Operating temperature: | -30ºC~70ºC |
Closing time: | ≤2s |
Opening time: | ≤450s(DC4.5V) |
Operating current: | ≤70mA(DC4.5V) |
Nominal pressure: | 1.6Mpa |
Nominal diameter(mm): | DN25-100 |
Leakage: | ≤0.55dm3/h(0.8MPa) |
Opening time: | ≤180s(DC4.5V) |
Operating voltage: | DC 3~7.2V |
Blocked current: | ≤220mA |
motor resistance | 21Ω±1.5Ω |
Certification: | Reach, Rohs,ATEX |
1. The red wire and the black wire are the power wires, the black wire is connected to the positive electrode, and the red wire is connected to the negative electrode to open the valve;
2. Optional in-position signal output lines: 2 white lines are the valve-open in-position signal lines, which are short-circuited when the valve is in place; 2 blue lines are the valve-close in-position signal lines, which are short-circuited when the valve is in place; (After the valve is opened or closed, the power supply is usually extended for 5s to ensure the stability of the in-position signal)
3. The deceleration box of the valve can be rotated 180 degrees as a whole according to the convenience of the customer to install the control box, and the valve can be used normally after rotation;
4. Use standard flange bolts to connect valves, pipes, and flowmeters. Before installation, the end face of the flange should be carefully cleaned to prevent iron slag, rust, dust, and other sharp objects on the end surface from scratching the gasket and causing leakage;
5. The valve should be installed in the pipeline or flowmeter with the valve closed. It is strictly prohibited to use it in a state of overpressure or gas leakage and to detect leakage with open fire;
6. The appearance of this product is provided with a nameplate
Application
1. Are you a factory or only a company?
Suppliers with verified business licenses